Risk of explosion
Static electricity can create damages not just with the high voltage flow, but also by creating a spark. That spark can trigger a fire or an explosion depending on the working environment conditions. In various industries and production fields, there are many cases where electrostatic discharge triggers a serious accident such as ignition or explosion.
Examples:
- In the industry dealing with polymer materials with high insulation resistance, the polymer film comes into contact with many rollers, increasing the charge density and causing an electrostatic discharge when the film separates from the metal roller. With a charged film accompanied by a large area, the electric field close to the nearby conductor is also strong, so ignition may occur where there is a flammable atmosphere.
- In the case of combustible gas, spark discharge occurs when it is mixed with air, and the gas may ignite and explode. At this time, the flammable gas is considered to have exceeded the discharge energy threshold.
Causes of sparks
Here are some examples of common damages due to electrostatic breakdown from electrostatic discharge, related to the semiconductors:
The table shows the minimum ignition energy threshold for spark discharges, in flammable gases mixed with air.
However, since gas ignition is a stochastic phenomenon, the threshold value of minimum ignition energy is not absolute but a measure of danger.
The ignition energy in the case of powder is larger than the gas one. However, it is dangerous if the conductor is charged or the density of charged dust is high. Also, the finer the powder particles, the lower this energy value and the greater the risk of explosion due to electrostatic discharge.
In addition, when dealing with oil, the danger increases. Irregular actions such as cleaning the inside of the tank of a crude oil tanker may cause an electrostatic discharge, which may cause an explosion. In the medical field, treatment using an oxygen tank or oxygen tent can lead to ignition due to electrostatic discharge caused by charging of clothes.
Electromagnetic interference
Electromagnetic waves are generated by electrostatic discharge caused by steep pulse discharges.
Obstacles caused by electromagnetic waves can:
- be a source of noise in measurement and communication equipment at the production site,
- affect the system,
- cause malfunctions and damage the system.
Examples
For example, when suddenly rising from a steel desk during the dry season in winter, a strong electrostatic discharge occurs when a human body touches the desk. At that time, if you are using a personal computer on your desk, the machine may stop working.
In the case of devices such as personal computers, there is almost no case of damage to the internal devices. However, for example, when a production plant is controlled by computer devices, the effects of device malfunction due to electromagnetic interference are large. This will result in losses. In addition, electromagnetic waves generated by electrostatic discharge contain a wide range of frequency components, so the range of influence is widened.
How can IKEUCHI help?
As mentioned, it exists many cases where electrostatic discharge triggers a serious accident. Spark can trigger a fire or an explosion.
IKEUCHI can help to prevent explosion by reducing ESD with a humidifier. Adding moisture in the air will increase the conductivity. Therefore, they will be no more discharge and no risk of sparks.
That is why, as “the Fog Engineers” we’ve studied the optimal solution to prevent electrostatic discharge (ESD), by adding humidity in working environment. Our none-wetting Dry Fog humidifier offers the adequate solution for sensitive working stations.
Our humidification solution; AKIMist® Dry Fog Humidifier
The optimal environment to prevent static charge is when there is a high level of moisture, like in a bathroom. Static electricity will escape into the atmosphere through the moisture without accumulating and charging itself on the surface of the objects. That is why we recommend a humidification system to increase the amount of moisture contained in the air (absolute humidity).
Our AKIMist® humidifier, is a unique Japanese invention by Ikeuchi Japan, which offers full control of the humidity levels in a factory. It is an adiabatic humidifier, which means that it increases humidity by adding cold water to the air. AKIMist is known for its non-wetting abilities as the droplet size is less than 7.5μm. This means that the droplets are so small that they will bounce back without bursting on any surface. No risk of leakage or condensation. This is a very convenient ability in a factory with expensive machinery and materials which cannot get exposed to water or condense.
The AKIMist® “E” humidifier system provides a complete solution for ESD prevention. It is a total humidification system which can control the precise humidity level wanted with the installation of a sensor to the control panel.
AKIMist® “E” Dry Fog Humidifier
Our AKIMist®“E” spreads a Dry Fog that humidifies indoor environments without wetting due to its tiny droplet size around 7.5µm
Why is AKIMist® the most energy and cost efficient solution
The AKIMist®“E” running costs are five times lower than a steam humidification system, whether in water or energy.
Because it cools the room by 2℃ through evaporative cooling, it allows substantial HVAC energy savings.
It has very high efficiency for low maintenance costs.
catalog
Download our AKIMist® catalog to learn more about the unique technology behind dry fog
Related articles
Stay updated: Ikeuchi news & insights
"*" indicates required fields
Get expert advice:
contact us today
Would you like to know what Ikeuchi can do for your organization? We’re happy to discuss your needs and show how we can solve your challenges. You’ll receive a response from us within 24 hours!
"*" indicates required fields
Call us: +31 (0) 20 820 2175
- Global presence and experience
- The number 1 nozzle manufacturer in Japan
- Japanese Precision Technology