A humid climate
The cannabis plant originated in Central Asia and it grows wild in many tropical and humid parts of the world. In order to imitate these ideal growing conditions, cannabis needs to grow under strict humidification control and requires a completely climate-controlled environment to succeed.
How much humidity does cannabis need?
The required humidity level of Cannabis depends on the growing stage, but generally lies between 50-70%. If the humidity level is too low, the cannabis plants will transpire the water it needs to grow and flourish. This can lead to slow growth, small plants, dryness, or even cause the plants to litter.
On the other hand, a humidity level above limits could cause diseases and outbreak of fungi and bacteria. The air circulation is also of great importance to prevent this from happening. If the humidity level is so high that the plant cannot evaporate or draw nutrients from the soil, it will eventually rot.
This makes it imperial to have a climate system which can easily be controlled whenever the humidity or temperature level needs to change.
Recommended humidity levels
Stage in growing process
Recommended humidity level
Propagation stage
75-90%
Development stage
60-75%
Flowering stage
55-60%
Drying stage
50-55%
Reference: Front plant science, National Institute of health: Link
Consistency is key
The regulations for growing cannabis are strict since it’s often grown for medical purposes. Cannabis cultivation is subject to GAP and GMP regulations which among other things demand proper handling, storage, and cultivation methods to ensure product quality and safety. This means that cannabis cultivators need to take full control of the climate in the grow room and not compromise on any equipment.
AKIMist® humidification control for cannabis grow rooms
AKIMist® is a unique Japanese technology which can control humidity levels to perfection. AKIMist is known for its low energy use and non-wetting ability. It produces a “dry fog” consisting of tiny droplets of water around 7.5µm. The droplets are so small that they bounce back without bursting on any surface. This makes it possible to maintain growth consistency as unwanted droplets will not spread on any leaves or surfaces.
AKIMist® is non-wetting due to its tiny droplet size around 7.5µm.
AKIMist® prevents condensation on the leaves when placed at least 3 meter from the plants.
AKIMist® is compact (5 inch) and can easily fit into a growing tight room.
Why is AKIMist so energy efficient?
AKIMist uses 83% less energy than conventional steam humidification systems. One of the most important differences between steam humidification and a dry fog humidification system is that a steam system cannot shut down in between. This means that a lot of energy goes to waste. A dry fog system, on the other hand, can automatically turn on and off whenever the humidity level drops below the limit. This means that a 100% goes into the grow room and nothing is lost.
Why is Dry Fog more energy efficient?
AKIMist is extremely energy-efficient and uses up to 83% less energy than conventional humidification systems.
AKIMist cools around 2 degrees while controlling the humidity level. It reduces 20% of the energy used for air-conditioning and thereby saves cost.
AKIMist can be used for spot humidification and be placed directly by the source of issue. This reduces the price significantly as only a few units may be needed.
AKIMist® “E” Dry Fog Humidifier
Our AKIMist®“E” spreads a Dry Fog that humidifies indoor environments without wetting due to its tiny droplet size around 7.5µm
How does AKIMist work?
The AKIMist® technology is built around an atomizing unit which combines water, compressed air and ultrasonic waves. Two separate orifices spray out atomized droplets which collide in the center. Simultaneously they generate ultrasonic waves to further atomize the droplets and homogenize their size into less than 10µm – dry fog.
How can AKIMist maintain such a stable humidity level?
AKIMist is connected to a sensor system which continuously measures the humidity level in the growing room. If the humidity level drops below a certain limit, all AKIMist units will start again. The levels can also easily be managed from the control unit whenever a new growing phase sets in and the plants require a different level of humidity.
Is AKIMist® easy to install?
AKIMist® is very easy to install and can either be installed with a hanging down mounting kit or a wall mounting kit. Our close partners can assist you with the installation and further advise on your growing room conditions.
Other benefits of using the AKIMist® Dry Fog Humidifier
Installment and maintenance
AKIMist requires very little maintenance compared to other humidification equipment. In addition, it is very easy to maintain as it is installed within the factory and hanging from the ceiling or wall.
AKIMist is easy to install and can be fitted into any current HVAC design. AKIMist can be installed with a wall or ceiling fitting or
even as a portable option.
AKIMist is very compact. Like the size of a 5 inch smartphone. This makes it easy to fit into tight factory spaces.
demo of AKIMist®
Experience the impact of Ikeuchi’s precision spray technology and innovative solutions through the voices of industries worldwide. See how we help businesses excel with custom-made solutions and unparalleled reliability.
Related articles
Stay updated: Ikeuchi news & insights
"*" indicates required fields
Get expert advice:
contact us today
Would you like to know what Ikeuchi can do for your organization? We’re happy to discuss your needs and show how we can solve your challenges. You’ll receive a response from us within 24 hours!
"*" indicates required fields
Call us: +31 (0) 20 820 2175
- Global presence and experience
- The number 1 nozzle manufacturer in Japan
- Japanese Precision Technology