Data centers
Humidity control in a data center is important in order to avoid the build-up of static electricity and to prolong the durability of the servers and computers. ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) recommend a humidity level around 50%, with a minumum of 20% and a maximum of 80% RH.
Why is adiabatic humidification suitable for a data center? Adiabatic humidification is a suitable choice for humidification of data centers for these 4 reasons:
- Energy-efficient
- Cooling-effect
- Fully controllable
- Non-wetting
Energy-efficient
An adiabatic humidifier uses a lot less energy than a conventional steam humidifier. This is because it does not need to heat up the water, like a steam humidifier. Steam humidifiers need a lot of energy to heat water to its boiling point to generate steam. Furthermore, Steam humidification need to maintain high temperatures to keep water in a vapor state even when humidification is not actively occurring. This leads to standby energy losses, which is not the case for adiabatic humidification.
AKIMist “E” is the most energy efficient in its class and uses up to 83% less energy than systems based on steam humidifiers.
Cooling effect
Adiabatic humidifiers also have the advantage of a cooling effect while humidifying. When water molucules evaporate, they absorp heat from the air. This causes the temperature to decrease.
AKIMist yields a cooling of about 2℃, reducing temperatures with evaporative cooling. This will safe costs on air conditioning. This cooling effect is particularly useful for humidification of data centers where IT equipment is in the risk of over-heating.
Fully controllable humidification
Adiabatic humidifiers can be controlled very precisely and automatic through a sensor. When the sensor detects a small drop in humidity, the humidifier will start spraying. Comparatively, an air washer, which sprays water into the air conditioner, is very difficult to control as it’s sensitive to outside temperatures. Steam humidifiers can be controlled, but cannot be turned off in between lapses, which leads to a lot of wasted energy. Read more about different types of humidifiers here
Non-wetting adiabatic humidifier: AKIMist® “E”
One of the main advantages of the adiabatic humidifier AKIMist, is that it’s non-wetting. This is due to the small droplet size (below 10μm – the size of a skin cell!). As can be seen in the illustration, the droplets are so small that they will bounce back without bursting on any surface. This is a big advantage in a data storage facility where you cannot risk any condense on expensive equipment.
Humidity control in data centers with AKIMist® Dry Fog
AKIMist® “E” Dry Fog Humidifier
Our AKIMist®“E” spreads a Dry Fog that humidifies indoor environments without wetting due to its tiny droplet size around 7.5 µm.
demo of AKIMist®
Experience the impact of Ikeuchi’s precision spray technology and innovative solutions through the voices of industries worldwide. See how we help businesses excel with custom-made solutions and unparalleled reliability.
Other benefits of using the AKIMist® Dry Fog Humidifier
Energy and cost
AKIMist is extremely energy-efficient and uses up to 83% less energy than conventional humidification systems.
AKIMist cools around 2 degrees while controlling the humidity level. It reduces 20% of the energy used for air-conditioning and thereby saves cost.
AKIMist can be used for spot humidification and be placed directly by the source of issue. This reduces the price significantly as only a few units may be needed.
Installment and maintenance
AKIMist requires very little maintenance compared to other humidification equipment. In addition, it is very easy to maintain as it is installed within the factory and hanging from the ceiling or wall.
AKIMist is easy to install and can be fitted into any current HVAC design. AKIMist can be installed with a wall or ceiling fitting or
even as a portable option.
AKIMist is very compact. Like the size of a 5 inch smartphone. This makes it easy to fit into tight factory spaces.
Health and Environment
AKIMist can maintain an ideal humidification level with the help of a sensor. This significantly reduces the build-up of static electricity in a factory and reduces errors and scrap.
Due to the small size droplets, which are as small as dust particles, these droplets can suppress the dust. In addition, the increased humidity also helps to suppress dust.
Maintaining a relative humidity level of around 50% will reduce the risk of viruses from spreading between employees. This increases the well-being of the employees and increases productivity.
demo of AKIMist®
Experience AKIMist® Dry Fog in person at your facility of ours. It’s also possible to hire a portable unit for a testing period.
Related articles
Stay updated: Ikeuchi news & insights
"*" indicates required fields
Get expert advice:
contact us today
Would you like to know what Ikeuchi can do for your organization? We’re happy to discuss your needs and show how we can solve your challenges. You’ll receive a response from us within 24 hours!
"*" indicates required fields
Call us: +31 (0) 20 820 2175
- Global presence and experience
- The number 1 nozzle manufacturer in Japan
- Japanese Precision Technology